Skip to content

An evacuation plan is a documented procedure that tells employees when to leave a building, which routes to take, where to gather and how the organization will confirm everyone is out safely. In a workplace, it sits inside your wider emergency planning and covers fires, gas leaks, chemical releases, bomb threats, floods and any other event that makes staying inside more dangerous than leaving.

This guide covers what OSHA expects, how to build a workplace evacuation plan step by step, people who need assistance, staff who are not on site, and a template you can copy.

Book a call with our team

What is an evacuation plan?

An evacuation plan, sometimes called an emergency evacuation plan or building evacuation plan, is the part of your emergency planning that deals with moving people out of harm's way. It answers five practical questions:

  • When: Which events trigger an evacuation, and which call for sheltering in place instead.

  • Who decides: The person, or role, with authority to order an evacuation, plus a backup.

  • How: Primary and secondary routes from every area of the building, shown on posted maps.

  • Where: Assembly points that are safe, large enough and away from emergency access.

  • Who is missing: How you account for every employee, contractor and visitor afterward.

It sits inside your wider emergency action plan, which also covers reporting emergencies, rescue and medical duties and contacts. The evacuation plan is the most practiced part of it, and the part that most often fails on the day because routes are blocked, roles are unclear or nobody can say who is still inside.

What OSHA expects from a workplace evacuation plan

OSHA does not have a standalone "evacuation plan" rule. Evacuation requirements sit within its emergency action plan standard, 29 CFR 1910.38, which applies when another OSHA standard requires an emergency action plan, and within its exit route standards, 29 CFR 1910.36 and 1910.37. For the full picture of those requirements, see our guide to the emergency action plan.

For the evacuation part specifically, OSHA expects your plan to cover:

  • Evacuation procedures: The type of evacuation to use and exit route assignments.

  • Critical operations: Procedures for any employees who stay behind briefly to shut down equipment or processes before they evacuate.

  • Accounting: Procedures to account for all employees after an evacuation.

  • Alarm system: An employee alarm system with distinctive signals, so people recognize an evacuation alarm.

  • Trained helpers: Designated, trained employees to assist in a safe and orderly evacuation.

  • Review: Reviewing the plan with each employee when it is created, when their responsibilities change and when the plan changes.

The plan should be written, kept in the workplace and available to employees. Employers with 10 or fewer employees may communicate the plan orally. OSHA's exit route rules also mean most workplaces need at least two exit routes, kept clear, clearly marked and wide enough for the people using them.

OSHA's Evacuation Plans and Procedures eTool adds practical guidance, including planning for visitors and for employees with disabilities or who do not speak English, and roughly one evacuation warden for every 20 employees. Treat all of this as the floor, and check your state plan and local fire code for extra requirements.

Types of evacuation and when to shelter in place instead

Not every emergency means everyone leaves at once. Name each response in your plan and the events that trigger it.

Response What it means Typical triggers
Full evacuation Everyone leaves the building and goes to the assembly point Fire, gas leak, structural damage, bomb threat with a credible risk inside
Partial evacuation Only affected floors or areas leave, others stay put Localized smoke, chemical spill in one area, flooding on lower floors
Phased evacuation Floors leave in a set order, usually the fire floor and those above first High-rise buildings where stairwells cannot take everyone at once
Horizontal evacuation People move to a protected area on the same floor Healthcare and care settings, or areas of refuge for people who cannot use stairs
Shelter in place People stay inside, often in an interior room, until told otherwise Tornado, severe storm, hazardous release outside, civil unrest nearby
Lockdown People secure themselves in lockable rooms away from a threat Active threat or intruder inside or near the building

The hardest call is often whether to leave or stay. A chemical release nearby or a tornado warning usually makes inside safer, while a fire inside does the opposite. Write the decision rules into the plan, including how to switch if a route becomes unsafe partway through.

How to create a workplace evacuation plan step by step

These eight steps work for a single office, a warehouse or a multi-site organization. For larger estates, repeat them for each building.

1. Identify what could force an evacuation

Start with a hazard review. List the events that could realistically force people out of each site: fire, explosion, gas leak, hazardous material release, flooding, earthquake, hurricane, bomb threat, workplace violence and utility failures. Walk the building with facilities and safety leads and ask what would happen if the storeroom caught fire or a delivery truck hit a gas line.

For each event, note whether it calls for full evacuation, partial evacuation or shelter in place. This list becomes the trigger table at the top of your plan.

2. Decide who can order an evacuation

Name the role that can order an evacuation, usually a site emergency coordinator, with a backup for every shift. Name roles, not individuals, so the plan survives vacations and departures. Make clear that anyone who discovers a fire should raise the alarm immediately without waiting for permission.

3. Map primary and secondary evacuation routes

Every area needs a primary route and a secondary route in case the first is blocked. Routes should be the quickest safe way out, wide enough, clearly marked, well lit and never obstructed. In multi-story buildings, use stairwells, not elevators, unless elevators are specifically approved for evacuation.

Then turn the routes into evacuation route maps posted at key points on every floor. A useful evacuation map includes:

  • "You are here" marker: Oriented to the way the reader is actually facing.

  • Primary and secondary routes: Shown with arrows in different colors or line styles.

  • Exits and stairwells: All usable exits, plus any that are not for evacuation.

  • Areas of refuge: Protected spaces where people who cannot use stairs can wait for help.

  • Safety equipment: Fire extinguishers, alarm pull stations, first aid kits, AEDs and spill kits.

  • Assembly point: Its name or number and the direction to it.

  • Legend and date: A simple key and the date the map was last checked.

Check the maps whenever the floor plan changes. A map that shows a corridor now blocked by new offices is worse than no map.

4. Choose assembly points

An assembly point is where people gather once they are out, so you can take a headcount and keep them clear of the incident and of emergency vehicles. Pick a primary point and an alternate, because wind, smoke or the incident itself may make the first one unsafe.

Good assembly points are far enough away to avoid smoke, falling glass and debris, upwind where possible, large enough for everyone, away from busy roads and clear of fire department access and hydrants. Your local fire department can advise. If you share a building, agree assembly points with other tenants so groups do not mix.

5. Assign floor wardens, sweepers and other roles

People follow people, especially when an alarm is sounding. Clear roles turn a crowd into an orderly evacuation.

Role Main duties
Emergency coordinator Decides to evacuate or shelter, liaises with the fire department, gives the all clear
Floor warden Directs people on their floor to the correct route, keeps people moving, reports to the coordinator
Sweeper Checks offices, restrooms, meeting rooms and storage areas, closes doors, is last out of the area
Stairwell monitor Keeps stairwell flow steady and stops people using elevators
Assistance buddy Helps a named colleague who needs support to evacuate
Accountability lead Runs the headcount at the assembly point and reports anyone missing
Critical shutdown staff Shuts down named equipment or utilities, then evacuates before their route is cut off

Train these people on the full layout, secondary routes, who needs extra help and which areas are hazardous. Assign backups on every shift and make wardens easy to spot, for example with high visibility vests.

6. Plan for people who need assistance

A plan that only works for people who can walk quickly down stairs is not complete. Build in support for employees with mobility, sight, hearing or cognitive impairments, temporary injuries, and visitors who do not know the building.

  • Individual plans: Create a personal emergency evacuation plan with each employee who wants one, covering their route, their buddies and any equipment such as an evacuation chair.

  • Voluntary self-identification: Invite employees to tell you, confidentially, if they would need help in an emergency, and keep that information limited to the people who need it.

  • Buddy system: Assign at least two trained buddies per person, so someone is always available.

  • Areas of refuge: Identify protected waiting areas, and make sure the fire department knows who may be waiting there.

  • Alerting: Make sure alarms reach everyone, for example with visual strobes, text alerts or app notifications for employees who are deaf or hard of hearing.

  • Visitors and contractors: Use sign-in records and make hosts responsible for getting their guests out.

7. Set up alerts and a way to account for everyone

The alarm tells people to go. Your communication plan keeps them informed and confirms who is safe. Plan to use building alarms on site, and an emergency notification system that sends texts, calls, emails and app alerts for people on site, people in transit and people who were due to arrive. Our article on why email alone isn't enough for emergency employee communication explains why a single channel is a risk. If you still rely on a calling cascade as a backup, see our guide to building a phone tree.

Accounting is where many evacuations stall, because paper roll calls struggle with hybrid schedules and visitors. Plan how you will:

  • Know who should be on site today, using badge, schedule or sign-in data.

  • Run the headcount at each assembly point, and who reports it to whom.

  • Ask everyone, including people off site, to confirm they are safe, and see who has not replied.

  • Pass the names and last known locations of anyone missing to the fire department's officer in charge.

  • Stop people going back inside until the fire department or the coordinator gives the all clear.

Prewrite the key messages, from the evacuation order to the all clear, so nobody drafts from a blank screen under pressure.

8. Write it down, share it and keep it current

Keep the written plan short, with detail in appendices, and store it where people can reach it from a phone. Walk every new hire through their routes and assembly point, and revisit the plan after every drill, incident, renovation or change in headcount.

Evacuation plan template

Use this template as the structure of your written plan. Copy the sections, then fill in the details for each site.

Plan section What to record Example entry
Site details Address, building type, floors, typical occupancy by shift Three floor office, around 120 staff on weekdays
Evacuation triggers Events that trigger full, partial or phased evacuation, and events that trigger shelter in place Fire alarm: full evacuation. Tornado warning: shelter in place in interior rooms
Authority Role that orders evacuation and the backup for each shift Site emergency coordinator, backup facilities manager
Alarm and alerts Alarm signals and the channels used to alert and update people Fire alarm plus text, voice call, email and app alert
Routes and maps Primary and secondary routes for each area, location of posted maps Floor 2 east: stair B, alternate stair A
Assembly points Primary and alternate assembly points with directions Primary: north parking lot. Alternate: rear courtyard
Roles Names or roles for wardens, sweepers, stairwell monitors, buddies, accountability lead One floor warden and one sweeper per floor, per shift
Assistance plans Who has a personal evacuation plan, their buddies and equipment Two named buddies, evacuation chair at stair B
Critical shutdowns Equipment or utilities to shut down, by whom, and when to abandon Gas isolation valve, maintenance lead, only if safe
Accounting How you run the headcount and confirm safety for on site and off site staff Headcount at assembly point plus safety check message
Visitors and contractors Sign-in method and host responsibilities Visitor log, host escorts guest to assembly point
All clear and recovery Who gives the all clear, return or go home instructions, alternate site Coordinator confirms with fire department before re-entry
Training and drills Drill schedule, last drill date, actions from the last review Next drill: Q1, review alert timings

Running evacuation drills that test the whole plan

A drill is the only honest test of an evacuation plan. Timing how long it takes to clear the building is not enough. A good drill also tests the alerts, the headcount and support for people who need assistance. Decide in advance what to measure:

  • Alerting: How quickly did everyone receive the alarm and the follow up messages, including remote and off site staff?

  • Routes: What happened when you blocked an exit?

  • Roles: Did wardens and sweepers know what to do, and were backups in place on every shift?

  • Assistance: Did buddies reach the colleagues they support, and did the areas of refuge work?

  • Accounting: How long did it take to confirm everyone was safe or to produce a list of who was missing?

Vary the scenario, time of day and blocked exits, and debrief afterward to update the plan. How often you must drill depends on your industry, occupancy type and local fire code, so check with your fire marshal. Our guide to running a fire drill covers planning, observing and reviewing drills in more detail.

Evacuation planning for remote, traveling and multi-site staff

Most evacuation plans assume everyone is in one building. Your plan should also cover:

  • Multi-site teams: A short plan for each site, owned locally, with a shared format so a regional or central team can support any location.

  • Shared and leased buildings: Agree routes, alarms and assembly points with the landlord and other tenants, and get a copy of the building's own plan.

  • Hybrid staff: Know who is actually in the office today, so your headcount is checked against reality rather than the org chart.

  • Field and lone workers: People working alone or on customer sites need a way to raise an alarm and confirm they are safe. See our lone worker safety solution.

  • Traveling staff: Employees in hotels, client offices or in transit should know to check exits on arrival, and you should be able to reach and locate them if an incident happens nearby.

  • Wider area events: Hurricanes, wildfires and floods can force regional evacuations, so link this plan to your inclement weather policy.

The common thread is visibility. You cannot evacuate or account for people if you do not know where they are.

How Vismo helps you evacuate and account for your people

Vismo gives safety, security and HR teams one place to alert people, see where they are and confirm they are safe.

  • Multi-channel alerts: Send evacuation and all clear messages by SMS, voice call, email, app push, Microsoft Teams and Slack at the same time with our mass notification system.

  • Two-way safety checks: Staff confirm they are safe with one tap, and you see in real time who has not responded.

  • Location targeting: Use geofencing to alert everyone inside a building or area, and get alerted when people enter or leave a zone.

  • Live location: See employees on a live map through the Vismo app or dedicated devices, so you know who is on site, in transit or elsewhere.

  • Incident awareness: Threat intelligence flags nearby incidents such as fires, severe weather or civil unrest that might trigger an evacuation.

  • Lone and traveling staff: SOS alarms, timed check-ins with escalation and travel security support cover people who are not in your building.

  • Audit trail: Every alert, reply and action is logged, so you can review response times after a drill or real incident.

Bringing alerts, location and response together is the core of critical event management. For what to say to employees and stakeholders during and after an incident, read our guide to crisis communication, and see how Vismo supports crisis and incident management.

Evacuation Plan FAQ

What are the 5 P's of evacuation?

The 5 P's are a household evacuation checklist: people (and pets), prescriptions, papers, personal needs and priceless items. At work, people should leave immediately without collecting belongings.

What are the four stages of evacuation?

Emergency planners usually describe evacuation as a sequence: the decision to evacuate, the warning or alert, the movement of people to a safe place, and sheltering and accounting for them there, followed by a controlled return once the area is declared safe. Sources split the stages slightly differently, but every version depends on a clear decision maker and fast, reliable communication.

What are the five basic emergency procedures?

Many organizations group protective actions into five responses. The Standard Response Protocol widely used in schools, for example, names them as hold, secure, lockdown, evacuate and shelter. Workplaces often use a similar set: evacuate, shelter in place, lockdown, medical response and a secure or hold instruction. Whatever names you use, your plan should define each one and its triggers.

Do small businesses need a written evacuation plan?

Where an OSHA standard requires an emergency action plan, it must be written, kept in the workplace and available to employees. Employers with 10 or fewer employees may communicate the plan orally. Even when oral communication is allowed, a short written plan and posted route maps make training and drills far easier.

How often should you practice an evacuation plan?

There is no single federal frequency that applies to every workplace. Drill requirements depend on your industry, occupancy type and state and local fire code, so check with your fire marshal. Many employers drill at least once a year and after any significant change to the building, the workforce or the plan.

Make your evacuation plan work on the day

An evacuation plan is only as good as the alerts that start it and the headcount that ends it. Build the plan, practice it with real scenarios and make sure you can reach and account for every employee, wherever they are.

Request a demo

Latest News stories...

Army doctor examining child

Most Dangerous Countries in the World

There is no single answer to which country is the most dangerous. This guide explains the 2026 rankings, every State Department Level 4 country and how US employers can protect traveling staff.

Read more

Rescue team search trough ruins

What Is Crisis Management

Crisis management is how an organization prepares for, responds to and recovers from events that threaten its people and operations. Here is how it works, with a plan template.

Read more

Male worker waiting the train platform at the station

Phone Tree

A phone tree passes an urgent message from person to person until everyone is reached. Here is how one works, how to set one up and a template and scripts you can use today.

Read more

View latest newsfeed